Volltextergebnisse:

programmversion_0.5

261 Treffer, Zuletzt geändert: vor 21 Monaten

as OLED-Display unsigned long previousMillisSerialPrint = 0; // Ausgabe an die serielle Schnitt... as OLED-Display const unsigned long intervalSerialPrint = 500; // Ausgabe an die serielle Schnitt... , OUTPUT); digitalWrite(13, HIGH); Serial.print("PWM frequency PIN D9 and D10 is set to: "); Serial.println(frequencyFan); } if(successPeltier) { S

programmversion_0.4

200 Treffer, Zuletzt geändert: vor 21 Monaten

as OLED-Display unsigned long previousMillisSerialPrint = 0; // Ausgabe an die serielle Schnitt... as OLED-Display const unsigned long intervalSerialPrint = 500; // Ausgabe an die serielle Schnitt... , OUTPUT); digitalWrite(13, HIGH); Serial.print("PWM frequency PIN D9 and D10 is set to: "); Serial.println(frequencyFan); } if(successPeltier) { S

programmversion_0.3

138 Treffer, Zuletzt geändert: vor 21 Monaten

as OLED-Display unsigned long previousMillisSerialPrint = 0; // Ausgabe an die serielle Schnitt... as OLED-Display const unsigned long intervalSerialPrint = 500; // Ausgabe an die serielle Schnitt... , OUTPUT); digitalWrite(13, HIGH); Serial.print("PWM frequency PIN D9 and D10 is set to: "); Serial.println(frequencyFan); } if(successPeltier) { S

programmversion_0.2

89 Treffer, Zuletzt geändert: vor 21 Monaten

as OLED-Display unsigned long previousMillisSerialPrint = 0; // Ausgabe an die serielle Schnitts... as OLED-Display const unsigned long intervalSerialPrint = 500; // Ausgabe an die serielle Schnitts... , OUTPUT); digitalWrite(13, HIGH); Serial.print("PWM frequency PIN D9 and D10 is set to: "); Serial.println(frequencyFan); } if(successPeltier) { S

programmversion_0.1

32 Treffer, Zuletzt geändert: vor 21 Monaten

die IF-Abfragen unsigned long previousMillisSerialPrint = 0; // Ausgabe an die serielle Schnitts... n Millisekunden const unsigned long intervalSerialPrint = 250; // Ausgabe an die serielle Schnitts... , OUTPUT); digitalWrite(13, HIGH); Serial.print("PWM frequency PIN D9 and D10 is set to: "); Serial.println(frequencyFan); } if(successPeltier) { S

programmversion_0.6

4 Treffer, Zuletzt geändert: vor 21 Monaten

ors.getAddress(environmentThermometer, 0)) Serial.println("Unable to find address for Device 0"); if (!sensors.getAddress(coolerThermometer, 1)) Serial.println("Unable to find address for Device 1"); if (!sensors.getAddress(cupbaseThermometer, 2)) Serial.println("Unable to find address for Device 2"); if (!sensors.getAddress(cuptopThermometer, 3)) Serial.println("Unable to find address for Device 3"); </code>